Punch Tools

Punch Tools
Production Machinery
arrow Light Duty Lab Presses
arrow Air Punch Press
arrow Porta Press
arrow Gang Busters
  arrowGang Buster 1
  arrowGang Buster 2
  arrowGang Buster 3
  arrowGang Buster 4
  arrowGang Buster 5
arrow PLC Gangbusters
arrow Hydra Press
arrow Maxi Press
arrow Punch Master
Custom Made
Productivity Tools
arrow Decoiler
arrow Intercheangable
Embossing Rolls
Used Equipment

Aluminum Extrusion Punching

Punch Tools



Punch Tools - Air/Oil 8 Station Gang Buster 3

Oil Air Gang Buster
Oil Air Gang Punch  

Air/oil power cylinders offer an excellent alternative to traditional power sources for punching. The air/oil cylinder magnifies shop air 200 times to deliver sufficient power for light duty punching applications that a standard air cylinder could not obtain unless the diameter was huge.

Air/oil gang punches are great for light gauge extrusion and offer a low maintenance solution for production machines. Only a shop air hookup is required — no hydraulic oil — few moving parts to wear.


Take the machine to the extrusion not extrusion to the machine. This allows greater flexibility in plant design and layout. First off the unit is very portable with the following features:

Forklift moveable with balanced load and solid welded 2” square steel tube frame tube.
Low center of gravity for stability during move.
Relatively light weight — 1000 lb versus a press brake with sufficient tonnage weighing 10,000 lb and top heavy.
The Air/Oil Gang Buster could be relocated across the plant in a few minutes and be punching in a different department right away. Machine utilization goes through the roof and bottle necks are eliminated.


Ease of Hookup and Use
Air connection hookup to shop air system around the plant.
No need for hard wiring and a qualified electrician every time a move is needed.
Tethered foot pedal so operator has freedom to locate efficiently for loading and unloading.
  Oil Air Gang Buster
  Streamline Operations
Reduce equipment on the floor space and increase productivity — this is where the unit proves its worth.

After the 8 station Air/Oil Gang Buster was introduced finished goods were made to order.
Finished goods inventory was virtually eliminated and the space used for other activities.
Only raw material inventory needs to be managed — a significant inventory reduction.
C-frame based tooling is low cost solution with flexibility and readily available parts.
This manufacturing flexibility was the key to meeting the productivity goals.
Machine Specifications
Shop air connection only required for operation.
Foot print 120”L x 24”W x 32”H to table top/working height
(approximately 84” overall).
16 fixed pitch stations at 3 tons each.
Quick connect air hose connections.
Punches and dies — off the shelf common components.
Production rate — punch cycle time of 5 seconds.
    Contact us for a quote on your application at sales@punchtools.com.

Tool and Die Maker and Industrial Supplies | Tool and Die Manufacturing | Parts Manufacturing
Production Machinery | Specialized Industry Knowledge

Home | About Us | Contact Us | Testimonials | Newsletters | Links | Sitemap