Shop By Category

Punches, Dies & Other Standard Tooling (26)

MUTCD Compliant Mounting Hole Punch for 1/8 Aluminum

MUTCD Mounting Hole Punching

Optimized for .100" and 1/8" Aluminum Sign Fabrication

As Department of Transportation (DOT) standards in Indiana and Kentucky shift toward heavier sign substrates, fabricators are facing new production hurdles. Moving from traditional thin-gauge sheets to .100" and 1/8" aluminum requires a significant jump in punching power and precision.

Our Porta-Press Mounting Hole Punch Station is engineered to meet this demand, ensuring your shop stays compliant with MUTCD and state-specific mounting requirements without slowing down production.

Precision Offsets: 3" and 6" Industry Standards

Achieving the correct center-line placement is vital for structural integrity in high-wind zones. Our tool uses a matrix of sliding pins that allow you to set specific offsets instantly:

3-Inch Offset Standard for regulatory signage.

6-Inch Offset Required for 48" warning signs.

1.5" & Custom Infinite flexibility for specialty tracks.

Versatile Punching: Offset vs. Edge Holes

See why the Porta-Press is the complete station for 1/8" (.125) Aluminum Signage.

3" & 6" Offset Punching Perfect for DOT Warning & Regulatory Signs

Precision Edge Punching Ideal for Street Blades & Mounting Brackets

The "Heavy Gauge" Advantage

Standard manual punches often struggle once you reach .100" material, causing "oil-canning" or denting the aluminum. As shown in the video at [00:02:51], our system is rated for a maximum of 1/8 inch aluminum even with our largest punches.

Ball-Lock Punching [00:00:58]: Ensures perfect orientation for non-round holes (like square or oblong mounting slots).
Clean Shearing [00:02:20]: Watch as it handles .062 and .125 aluminum with a "nice clean hole and pretty much no burr."
Versatile Materials [00:03:10]: Beyond aluminum, the station effortlessly processes ACM and Polycarbonate without destroying the substrate.

Requirement	Porta-Press Capability
Max Thickness	.125" (1/8") 8-Gauge Aluminum (5052 Grade)
Mounting Offsets	3", 6", 12", and 1.5" standard backstops
Punch Style	Quick-change Ball Lock for perfect alignment
Applications	Traffic Signs, ACM Panels, & Polycarbonate

Upgrade Your Traffic Sign Station

Don't let the shift to 1/8" aluminum bottleneck your shop. Get the power of the Porta-Press.

Request a Quote for Your Shop

Visit our Knowledge Library | Watch on YouTube